How To Guides

Step 1.

Remove cap cover and point towards desired area

Step 2.

Proceed to spray minimum 3- 4 pumps onto
desired area

Step 3.

Rub thoroughly into hands & allow to dry for up to 20 seconds

How it Works

Step 1.

Instantly moisturizes hands and locks in moisture for over 5 hours leaving a non-volatile covalent bond on your hands with millions of nano-spikes per square inch. Only physical friction wears the product off of the hands.

Step 2.

Then kills 99.9% of all bacteria / viruses as you rub it through your hands.

Step 3.

Dry’s in under 30 seconds to leave hands soft / subtle and protected

Step 4.

Protection lasts for up to 16 hours from one use depending on amount of friction applied to your hands.

Step 1.

Rotate nozzle to ON

Step 2.

Position bottle 1 inch away from desired area to be treated

Step 3.

Spray or fog onto fabric until thoroughly covered

Step 4.

Let stand for up to 30 seconds

How it Works

Step 1.

Sprayed onto all types of fabric and does not stain any type of fabric leaving a non-volatile covalent bond on the fabric coated with millions of nano-spikes per square inch.Only physical friction wears the product off of the fabric.

Step 2.

Then kills 99.9% of all bacteria / viruses and odours of fabric.

Step 3.

Can be steamed or sprayed onto Fabric.  Dry’s instantly or under 30 seconds depending on how it is applied

Step 4.

Protection lasts for up to 24 hours from one use depending on amount of friction applied to the fabric.

Step 1.

Rotate nozzle to ON

Step 2.

Position bottle 1-2 inches away from desired area
to be treated

Step 3.

Spray or fog desired area until thoroughly wet

Step 4.

Let stand for up to 30 sec or immediately wipe dry with soft cloth or paper towel

How it Works

Step 1.

Sprayed onto all types of surfaces / carpet and does not stain any type of carpet of surface leaving a non-volatile covalent bond on the surface coated with millions of nano-spikes per square inch.Only physical friction wears the product off of the surface.

Step 2.

Then kills 99.9% of all bacteria / viruses and odours of carpet or surfaces. Provides cleaning to surfaces and carpets.

Step 3.

Can be fogged or sprayed onto surface or carpet.  Dry’s instantly or under 30 seconds depending on how it is applied

Step 4.

Protection lasts for up to 30 days from one use depending on amount of friction applied to the carpet or surface.

Step 1.

Rotate nozzle to on or remove cap

Step 2.

Clean desired area to be treated prior to
application of product

Step 3.

Spray or mop onto treated area

Step 4.

Let stand for up to 30 minutes

Step 5.

If applying on floors please rinse area with water once treatment has been applied after 30 minutes.

Step 6.

If applying on bottom of shoes, place treatment on the bottom of shoes and let stand for up to 30 minutes

How it Works

Step 1.

Sprayed onto all types of surfaces and shoes / boots / heels / sandals and other footwear leaving a bond with millions of nano-spikes per square inch to increase the coefficient of friction. Only physical friction wears the product off of the floor surface / shoe sole or sports equipment.

Step 2.

It then applies millions of nan-sized spikes to  increase traction on floors, stairs or footwear up to and over 200% when wet.

Step 3.

Product is sprayed onto surface and kept wet for 30 minutes; then water is applied to de-activate the adhesion.All footwear is left sitting in the solution for 1 hour – then water is applied to the sole to de-activate the adhesion. All other types of sports equipment or rubber, foam, need to be left sitting in the solution for 1 hour - then water is applied to de-activate the adhesion.

Step 4.

Increased grip / safety and traction lasts:
1. Up to 1 and over 1 year on floors.
2.  Up to and over 3-6 months on footwear.
3. Up to and over 3-6 months of use on sports equipment, rubber, foam and other substrates.

Made With Care
in Canada
High Quality

Long Lasting

Customer Support

Great Service

Secure Payment

Powered by Stripe

Great Prices

Can't be beat